UIO
每个UIO设备可以通过设备文件（/dev/uioX）和sysfs的属性文件来访问。
可以通过mmap映射/dev/uioX来访问UIO设备的寄存器或者RAM。
直接read /dev/uioX来获取UIO设备的中断，read()会被阻塞，发生中断时就会返回。
Each UIO device is accessed through a device file and several sysfs attribute files. The device file will be called /dev/uio0 for the first device, and /dev/uio1, /dev/uio2 and so on for subsequent devices.
/dev/uioX is used to access the address space of the card. Just use mmap() to access registers or RAM locations of your card.
Interrupts are handled by reading from /dev/uioX. A blocking read() from /dev/uioX will return as soon as an interrupt occurs. You can also use select() on /dev/uioX to wait for an interrupt. The integer value read from /dev/uioX represents the total interrupt count. You can use this number to figure out if you missed some interrupts.
uio driver
uio_pci_generic
UIO设备需要UIO内核驱动的支持，uio_pci_generic是一个通用的PCI UIO设备的内核驱动。
UIO does not completely eliminate the need for kernel-space code. A small module is required to set up the device, perhaps interface to the PCI bus, and register an interrupt handler. The last function (interrupt handling) is particularly important; much can be done in user space, but there needs to be an in-kernel interrupt handler which knows how to tell the device to stop crying for attention.
///drivers/uio/uio_pci_generic.c
static struct pci_driver driver = {
.name = "uio_pci_generic",
.id_table = NULL, /* only dynamic id's */
.probe = probe,
.remove = remove,
};
interrupt
uio_register_device 注册UIO驱动时时，会注册中断处理函数uio_interrupt:
/**
* uio_register_device - register a new userspace IO device
* @owner: module that creates the new device
* @parent: parent device
* @info: UIO device capabilities
*
* returns zero on success or a negative error code.
*/
int __uio_register_device(struct module *owner,
struct device *parent,
struct uio_info *info)
{
///...
if (info->irq && (info->irq != UIO_IRQ_CUSTOM)) {
ret = request_irq(info->irq, uio_interrupt,
info->irq_flags, info->name, idev);
if (ret)
goto err_request_irq;
}
}
/**
* uio_interrupt - hardware interrupt handler
* @irq: IRQ number, can be UIO_IRQ_CYCLIC for cyclic timer
* @dev_id: Pointer to the devices uio_device structure
*/
static irqreturn_t uio_interrupt(int irq, void *dev_id)
{
struct uio_device *idev = (struct uio_device *)dev_id;
irqreturn_t ret = idev->info->handler(irq, idev->info); ///irqhandler
if (ret == IRQ_HANDLED)
uio_event_notify(idev->info); ///notify userspace
return ret;
}
- uio_event_notify
UIO设备每次发生中断时，都会增加uio_device->event，然后唤醒等待进程
/** notify userspace application
* uio_event_notify - trigger an interrupt event
* @info: UIO device capabilities
*/
void uio_event_notify(struct uio_info *info)
{
struct uio_device *idev = info->uio_dev;
atomic_inc(&idev->event);
wake_up_interruptible(&idev->wait); ///wake up waiting process
kill_fasync(&idev->async_queue, SIGIO, POLL_IN);
}
- read /dev/uioX
每次调用open /dev/uioX时，内核都会创建一个uio_listener，关联到struct file->private_data:
static int uio_open(struct inode *inode, struct file *filep)
{
struct uio_device *idev;
struct uio_listener *listener;
int ret = 0;
mutex_lock(&minor_lock);
idev = idr_find(&uio_idr, iminor(inode));
mutex_unlock(&minor_lock);
///...
listener = kmalloc(sizeof(*listener), GFP_KERNEL);
if (!listener) {
ret = -ENOMEM;
goto err_alloc_listener;
}
listener->dev = idev;
listener->event_count = atomic_read(&idev->event);
filep->private_data = listener;
然后每次read()时，发现uio_listener->event_count与uio_device->event不相同时，就意味着发生中断，会返回对应的值；否则，将当前进程加入到uio_device->wait队列，然后挂起当前进程：
static ssize_t uio_read(struct file *filep, char __user *buf,
size_t count, loff_t *ppos)
{
struct uio_listener *listener = filep->private_data;
struct uio_device *idev = listener->dev;
DECLARE_WAITQUEUE(wait, current);
///...
add_wait_queue(&idev->wait, &wait);
do {
set_current_state(TASK_INTERRUPTIBLE);
event_count = atomic_read(&idev->event);
if (event_count != listener->event_count) { ///irq happened
if (copy_to_user(buf, &event_count, count))
retval = -EFAULT;
else {
listener->event_count = event_count;
retval = count;
}
break;
}
if (filep->f_flags & O_NONBLOCK) {
retval = -EAGAIN;
break;
}
if (signal_pending(current)) {
retval = -ERESTARTSYS;
break;
}
schedule();
} while (1);
__set_current_state(TASK_RUNNING);
remove_wait_queue(&idev->wait, &wait);
return retval;
}
- uio_mmap
当用户态driver调用mmap映射/dev/uioX时，内核会调用uio_mmap映射UIO设备的RAM：
static int uio_mmap(struct file *filep, struct vm_area_struct *vma)
{
struct uio_listener *listener = filep->private_data;
struct uio_device *idev = listener->dev;
int mi;
unsigned long requested_pages, actual_pages;
int ret = 0;
if (vma->vm_end < vma->vm_start)
return -EINVAL;
vma->vm_private_data = idev;
mi = uio_find_mem_index(vma);
if (mi < 0)
return -EINVAL;
requested_pages = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
actual_pages = ((idev->info->mem[mi].addr & ~PAGE_MASK)
+ idev->info->mem[mi].size + PAGE_SIZE -1) >> PAGE_SHIFT;
if (requested_pages > actual_pages)
return -EINVAL;
if (idev->info->mmap) {
ret = idev->info->mmap(idev->info, vma);
return ret;
}
switch (idev->info->mem[mi].memtype) {
case UIO_MEM_PHYS:
return uio_mmap_physical(vma);
case UIO_MEM_LOGICAL:
case UIO_MEM_VIRTUAL:
return uio_mmap_logical(vma);
default:
return -EINVAL;
}
}
更多关于mmap参考Linux MMAP & Ioremap introduction.
userspace driver
fd = open(“/dev/uio0”, O_RDWR|O_SYNC);
/* Map device's registers into user memory */
/* fitting the memory area on pages */
offset = addr & ~PAGE_MASK;
addr = 0 /* region 0 */ * PAGE_SIZE;
size = (size + PAGE_SIZE 1) / PAGE_SIZE * PAGE_SIZE;
iomem = mmap(0, size, PROT_READ|PROT_WRITE, MAP_SHARED,
fd, addr);
iomem += offset;
/* Stop the counting */
*(u_char *)SH_TMU_TSTR(iomem) |= ~(TSTR_TSTR2);
...
/* Wait for an interrupt */;
read(fd, &n_pending, sizeof(u_long));
val = *(u_int *)SH_TMU2_TCNT(iomem);
...
/* Stop the TMU */
*(u_char *)SH_TMU_TSTR(iomem) &= ~(TSTR_TSTR2);
munmap(iomem, size);
close(fd);
详细参考 Using UIO in an embedded platform.